Bharat Aerospace Metals
Bhuleshwar, Mumbai, Maharashtra
GST No. 27AAKFB3480D1ZL
08047644986 80% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Bronze Alloys
Depending on the requirements of our clients we are providing Aluminum Bronze C63000 to them. It is made from best grade aluminium and bronze and is considered to be best choice for applications which require heavy loads, friction and abrasive wear. It is tested product and is customizable as per the choice of our patrons. It has high strength and is light weight product free from all types of flaws. This product has got an excellent market demand and we are customizing this as per the needs. Besides, we deliver this in the required time frame to our patrons.
Features:
*Your information is safe with us.
ASTM B-103 Standard Specification for Phosphor Bronze Plate, Sheet, Strip and Rolled Bar | ||||||||
| ASTM Spec. | B-103 | B-103 | B-103 | B-103 | B-103 | B-103 | B-103 | |
| ASTM Spec. | Annealed | H01 | H02 | H04 | H06 | H08 | H10 | |
| Temper | Annealed | Quarter Hard | Half Hard | Hard Tempered | Extra Hard | Spring Temper | Extra Spring | |
| Alloy | 510 | 510 | 510 | 510 | 510 | 510 | 510 | |
| UNS Number | C51000 | C51000 | C51000 | C51000 | C51000 | C51000 | C51000 | |
| Tensile Strength | 43-58 | 58-73 | 76-91 | 88-103 | 95-110 | 100-114 | ||
| Min - Max psi | ||||||||
| Rockwell B - Scale | 12-64 | 60-85 | 84-93 | 89-96 | 92-98 | 94-99 | ||
| Min - Max | ||||||||
| Superficicial | 24-59 | 53-73 | 71-78 | 74-81 | 76-82 | 77-83 | ||
| Min - Max | ||||||||
| Alloy | B-103 | B-103 | B-103 | B-103 | ||||
| UNS Number | Annealed | H01 | H02 | H04 | ||||
| Chemical composition % | ||||||||
| Alloy | 510 | 511 | 511 | 511 | ||||
| UNS Number | C51000 | C51000 | C51900 | C52100 | ||||
| Tin | 4.2-5.8 | 3.5-4.9 | 5.0-7.0 | 7.0-9.0 | ||||
| Phosphorus | .003-.35 | .03-.35 | .03-.35 | .03-.35 | ||||
| Iron, max | 0.1 | 0.1 | 0.1 | 0.1 | ||||
| Lead, max | 0.05 | 0.05 | 0.05 | 0.05 | ||||
| Zinc, max | 0.3 | 0.3 | 0.3 | 0.3 | ||||
| Copper | remainder | remainder | remainder | remainder | ||||
*Your information is safe with us.
| Standard Nearest ISO Designation International Equivalent | Chemical Composition by Wt. % | ||||||
| Cu% | Sn% | P% | Pb% | Zn% | |||
| BS 2874 PB - 102 | CuSn5 | IS 7811, DIN 17662 / 17672, ISO 427-1983, JIS H 3270 C-5102, ASTM B139 C5100 | Rem | 4.2 - 5.5 | 0.02 - 0.40 | 0.02 max | 0.03 max |
| BS 2870/2875 PB - 103 | CuSn6 | DIN 17662 / 17672, ISO 427-1983, JIS H 3270 C-5191, C-5191 | Rem | 38539 | 0.02 - 0.40 | 0.02 max | - |
| BS 2874 PB - 104 | CuSn8 | DIN 17662 / 17672, ISO 427-1983, JIS M 3270 C-5212, ASTM B139 C52100 | Rem | 39851 | 0.02 - 0.40 | 0.02 max | 0.03 max |
*Your information is safe with us.
High Tin bronze alloys are typically found in gear, high strength bushing and bearing applications where high strength and low speeds and heavy loads are present. Other high strength applications for these alloys are pump impellers, piston rings, steam fittings, valve bodies. High tin bronze castings utilized in movable bridge components, turntables for bridges and other structures for fixed and expansion bearings with slow or intermittent movement with heavy loads.
| CDA | ASTM | ASARCON | SAE | AMS | Federal | Ingot# | Military | Other Desc |
|---|---|---|---|---|---|---|---|---|
| C90300 | B505-08 |
| Cu% | Sn% | Pb% | Zn% | Fe% | Ni% | Sb% | P% | S% | Al% | Mn% | Si% | Bi% |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Note: Single values represent maximums. | ||||||||||||
| 86.00-89.00 | 7.50-9.00 | 0.30 | 3.00-5.00 | 0.20 | 1.00 | 0.20 | 1.50 | 0.05 | 0.005 | N/A | 0.005 | N/A |
| Tensile Strength(min) | Yield Strength(at .5% extention under load min) | Elongation(in 2in. or 50mm min, %) | Hardness(typical Bhn - 500kg) | Remarks | ||
|---|---|---|---|---|---|---|
| Ksi | MPa | Ksi | MPa | |||
| 44 | 22 | 18 | 70 |
| Alloy | Rating | Density |
|---|---|---|
| C90300 | 30 | 0.318 |
| CDA | ASTM | ASARCON | SAE | AMS | Federal | Ingot# | Military | Other Desc |
|---|---|---|---|---|---|---|---|---|
| C90500 | ASTM B505 | 100 | SAE 62 | AMS 4845 | QQ-C-390B TYPE III | 225 | MIL-B-11553 COMP 16 | GUN METAL |
| ASTM B22 | SAE J461 | QQ-B-1005 COMP. 16 | ||||||
| SAE J462 |
| Cu% | Sn% | Pb% | Zn% | Fe% | Ni% | Sb% | P% | S% | Al% | Mn% | Si% |
|---|---|---|---|---|---|---|---|---|---|---|---|
Note: Single values represent maximums.
| |||||||||||
| 86.00-89.99 | 9.00-11.00 | 0.30 | 1.00-3.00 | 0.20 | 1.00† | 0.20 | 1.5 | 0.05 | 0.005 | N/A | 0.005 |
| Tensile Strength(min) | Yield Strength(at .5% extention under load min) | Elongation(in 2in. or 50mm min, %) | Brinell Hardness(min) | Remarks | ||
|---|---|---|---|---|---|---|
| Ksi | MPa | Ksi | MPa | |||
| 44 | 303 | 25 | 172 | 10 | N/A |
| Alloy | Rating | Density |
|---|---|---|
| C90500 | 30 | 0.315 |
Phosphor Bronze - 5% Cold Rolled Strip (analysis above) has been cold reduced (By eight B & S gage numbers) 60.5% from its annealed condition to a tensile strength of approximately 100,000 PSI and elongation in 2” of 4%.
It has high tensile strength, good resistance to corrosion and fatigue and excellent forming properties.
It is used for fuse clips, lock washers, contacts for relays, mechanical springs, etc.
COMPLETE FACILITIES for Slitting - Shearing - Blanking and Edging. Available in coils or cut lengths. Sizes other than those listed and in all thicknesses .001 and heavier are obtainable and may be ordered for you.
SAE CA510
Cu. 95% Sn. 5%
ROCKWELL B92/98 approx.
PB STRIP
COMMERCIALLY KNOW AS SPRING STEEL PHOSPHOR BRONZE STRIP.
| CuSn4Pb4Zn4 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Standard | EN 12164* | ||||||||
| Material Nr. | CW456K | |||||||||
| Density | 8,8 kg/dm³ | |||||||||
Composition in % | Fe | Ni | P | Pb | Sn | Zn | Te | Cu | So | |
| min. | - | - | 0,01 | 3,5 | 3,5 | 3,5 | - | balance | - | |
| max. | 0,1 | 0,2 | 0,4 | 4,5 | 4,5 | 0,2 | 0,2 | balance | 0,2 | |
| Program L- ex stock A- on request | Tubes A | Rods A | Wires | Sections A | Sheets A | |||||
| Properties | easily machinable material | |||||||||
| Application | e. g. for spring contacts, locking pins | |||||||||
*Your information is safe with us.
| Standard | Nearest ISO Designation | International Equivalent | Chemical Composition by Wt. % | Conditions | |||||
| Cu% | Sn% | P% | Pb% | Zn% | Others | ||||
| BS 2874 PB - 102 | CuSn5 | IS 7811, DIN 17662 / 17672, ISO 427-1983, JIS H 3270 C-5102, ASTM B139 C5100 | Rem | 4.2 - 5.5 | 0.02 - 0.40 | 0.02 max | 0.03 max | Fe-0.10max Total Imp 0.50% max | M |
| BS 2870/2875 PB - 103 | CuSn6 | DIN 17662 / 17672, ISO 427-1983, JIS H 3270 C-5191, C-5191 | Rem | 6 - 7.5 | 0.02 - 0.40 | 0.02 max | - | Total Imp 0.20% max | O |
| BS 2874 PB - 104 | CuSn8 | DIN 17662 / 17672, ISO 427-1983, JIS M 3270 C-5212, ASTM B139 C52100 | Rem | 7.2 - 9 | 0.02 - 0.40 | 0.02 max | 0.03 max | Total Imp 0.30% max | M |
| Standard | Mechanical Properties | Applications | |||
| UTS N/mm2 | E% | Y.S. Rp 0.2 | Hardness | ||
| BS 2874 PB - 102 | 260 - 500 | 12 25 | N/mm2 80-410 | HB - | Having Good Endurance, corrosion and abrasion resistance. Nut, Bolts, Washers, Cotterpins, Automotives Systems, Marine Engg, Aviation Industries, Mining & Drilling Equipments, Clutch Discs etc. |
| BS 2870/2875 PB - 103 | 340 - 400 | 55 | 250 max | 85 min | Used in electrical motor, penal, Generator Aircraft Engineering, Heavy Engg. Excellent Tarnish & Corrosion Resistance to a wide range of waters & chemicals in such as paper and textile mfg. plants. |
| BS 2874 PB - 104 | 450 - 550 | 15 - 20 | 300 - 400 | - | This wrought alloy is a high performance product with exceptional bearing wear and properties, combined with excellent fatigue properties and corrosion fatigue resistance in marine. Applications and other corrosive enviroments. Applications include high duty fasteners, bearings and bushes, drive shafts, pump and valve components, high performance engine valve guides, electrical clamps, connectors and switchgears |
| * M - As Manufactured * O - Annelead * H - Hard | |||||
Typical Application for C54400 Phosphor Bronze Alloys
Electrical: Electrical Connectors
Industrial: Cam followers, Bushings, Gears, Pinions, Shafts, Valve Parts, Sleeve Bearings, Thrust Bearings, Screw Machine Products, Bearings, Thrust Washers
Marine: Marine Parts
Available Sizes:
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Flat bars, Square bars, Round Wires, Round Strips
Custom shapes are available upon request.
Chemical Composition:
Sn: 3.50-4.50%
Pb: 3.50-4.50%
Zn: 3.50-4.50%
P: 0.01-0.50%
Fe: 0.10% Max.
Zn: Balance
Note: Copper plus additions equal 99.50% minimum.
Typical Physical Properties:
Specific Gravity: 8.89 g/cm3
Coefficient of Thermal Expansion per °C: 17.30 x 10-6 (20-300°C)
Electrical Conductivity (% IACS): 19.00 % @ 68 F
Thermal Conductivity: 50.00 Btu · ft/(hr · ft2·oF)at 68F
Modulus of Elasticity in tension: 15000 ksi
Note:
1). the units are based upon US Customary.
International Specification:
Rods/Bars: UNS.C54400, CDA544, ASTM B139, B103
European Standards: CuSn4Zn4Pb4,JIS H3270, EN 12164 CW 456 K
Note:
ASTM: American Society for Testing and Materials
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced to ASTM/BS